How To Burn bootloader with Uno R3 and ArduinoISP
I see this question asked quite often and is an early stumbling block for those either new to Arduino or have created their own design and want to use the IDE to program it easily. I decided to make a short video showing how you can use an Arduino Uno R3 with ArduinoISP to burn a bootloader on a custom design, in this case our dual relay controller!
The process is really quite straightforward. The first step is to wire up the target board to the Programmer board, while the pins might change on the programmer board the target pins will always be named the same! Since we are using an Uno the pinout in the ArduinoISP sketch is what we will be using. Once we have the pins wired up, lets load the ArduinoISP sketch on.
After the sketch is loaded on our programmer board(Uno R3) its time to tell the IDE which board type our target board is. This is important as it determines which bootloader is burned onto the target. Some bootloaders disable the internal oscillator which is a problem if your design is running the internal clock at 8mhz like a pro mini for example. In this tutorial we are using our dual relay controller which is essentially an Uno clone (external clock 16mhz) so we will choose the Uno board type.
Now its really just a matter of selecting burn bootloader with Arduino as ISP selection and waiting till the process is complete. Once the bootloader is finished being burned, the target is now able to act as an Arduino compatible device and can be programmed with the IDE!
Hopefully this short tutorial will help those who have issues with this part of the Arduino experience!
jambunatha sethuraman
on December 30, 2013 - 02:47:15I bought Arduino Uno from banggood, China. I loaded the blink program and I received the message some thing related to snc…0x00 and the flashing continued. I did not understand the COM 3 connection verification and burn booloader. I am afraid to do anything with out prior knowledge. Your getting started is very methodic for a beginner as I am also a teacher teaching physics. Help me.
Ryan Edwards
on January 1, 2014 - 12:13:56What OS are you on? I am guessing(your on windows and) the driver isn’t loading for the board. Are you showing an Arduino Uno in device manager? If this board is a clone it may be using a different USB to serial chip in which case you would need the driver for that chip(Ft232rl for example). I should start answering some of these question in the vlbog, they I get similar one fairly often! Let me know some more detail and I will do my best to help out!
website
on August 9, 2014 - 22:57:26Very nice blog post. I definitely appreciate this site. Continue the good work!